> SIGN PRODUCTS
> DIMENSIONAL LETTERS > INSTALLATION
the following instructions for installing your dimensional
Please feel free to contact one of our signage consultants
if you have any installation questions at 1-800-416-8380.
1. Clean the installation surface of
any dirt or debris with a shop brush.
2. Position the spacing tape on the wall
and secure one end with masking tape. Unroll, level
and tape the other end. Spacing tapes show the general
position of each letter and are available free upon
3. Apply silicone to all of the pads
on the first letter. Position the letter on the wall
where indicated on the spacing tape. Tape the letter
to the wall with several strips of masking tape.
4. Continue with the remainder of the
letters, and allow the silicone to cure for at least
10 minutes before removing the masking tape.
that simple! Request a quote
for your dimensional letters now.
you do not see the signs you are looking for, give us a call
right now. Operators are standing by, 24 hours a day, to serve
fax: (937) 291-0361
Now, Toll Free 1-800-416-8380, fax: 1-937-291-0361